finch rings

If you're having problems using the forum or would like to suggest improvements that could be made, please post them in here
Post Reply
User avatar
diggles
...............................
...............................
Posts: 8
Joined: 21 Dec 2016, 22:42
Location: geraldton W.A

finch rings

Post by diggles » 31 Dec 2016, 14:38

where is the best place to buy split aluminium rings from or what is everyone else using

User avatar
E Orix
...............................
...............................
Posts: 2929
Joined: 29 May 2009, 23:30
Location: Howlong on NSW/Vic Border 30km from Albury
Location: Howlong NSW

Re: finch rings

Post by E Orix » 31 Dec 2016, 18:17

contact
Allan Tully

[email protected] or (03) 93386082

Allan is the main importer for Hughes rings from the UK
He carries good stocks of split aluminium rings, numbered or plain
Also he can organise your alum. rings with your initials etc if require
He also sells the small pliers(cheap) used to apply the leg rings so they close in a perfect circle
He will post them without a problem
Just make contact I am sure he can assist

User avatar
gomer
..............................
..............................
Posts: 5204
Joined: 23 Nov 2008, 17:41
Location: Victoria
Location: Victoria Australia

Re: finch rings

Post by gomer » 31 Dec 2016, 18:45

I'll second that AC Hughes that Allan imports are the best rings. And Allan is Always ready to assist when you need a hand.
Keeper of Australian Grass Finches

User avatar
diggles
...............................
...............................
Posts: 8
Joined: 21 Dec 2016, 22:42
Location: geraldton W.A

Re: finch rings

Post by diggles » 01 Jan 2017, 08:48

ok thanks a lot for your help i will give him a call

User avatar
Rojoberry
...............................
...............................
Posts: 6
Joined: 26 Jul 2016, 22:05
Location: Pakenham

Re: finch rings

Post by Rojoberry » 30 Jan 2017, 19:46

Hi all sorry to but in are the aluminum split rings hard to put on ? Verses a plastic split ring

User avatar
Rojoberry
...............................
...............................
Posts: 6
Joined: 26 Jul 2016, 22:05
Location: Pakenham

Re: finch rings

Post by Rojoberry » 30 Jan 2017, 19:53

Hi all sorry to but in are the aluminum split rings hard to put on ? Verses a plastic split ring

User avatar
E Orix
...............................
...............................
Posts: 2929
Joined: 29 May 2009, 23:30
Location: Howlong on NSW/Vic Border 30km from Albury
Location: Howlong NSW

Re: finch rings

Post by E Orix » 31 Jan 2017, 12:04

Allen Tully sells small plastic pliers for a couple of dollars which makes the task so much easier.
It also puts them on perfectly round which makes them tamper proof
There are several sizes just match the pliers to the ring

Post Reply

Return to “Feedback, Suggestions and Questions”