cheapest avairy mesh in perth/wa ?
whos selling it, and whats the price's like?
ive went too bunnings b4, but surely there is someone cheaper..
Mike
cheapest avairy mesh in perth/wa ?
- spanna
- ...............................
- Posts: 1071
- Joined: 03 Jun 2010, 16:03
- Location: Bullsbrook, Western Australia
- Contact:
Haven't used it before, or checked for quality, but here's an option:
http://www.tradewarehouse.com.au/wire-m ... -mesh.html
http://www.tradewarehouse.com.au/wire-m ... -mesh.html
- Greg41
- ...............................
- Posts: 586
- Joined: 10 Mar 2010, 21:09
- Location: Kingsley Suburb of Perth
- Location: Kingsley. Suburb of Perth Wa
Hi Mike, I have some new wire left over, I bought a heap at a good price . It may not be the best but certainly good enough for the average aviary.
There is a 30mtr roll 12.7x12.7 by914mm wide and the thickness is .9mm the other roll has 10mtrs on it ,12.7x12.7 by 914mm wide and 1.24mm thick.
If interested $80.00for the two rolls, if you want to phone No is 93041472.
Greg.
There is a 30mtr roll 12.7x12.7 by914mm wide and the thickness is .9mm the other roll has 10mtrs on it ,12.7x12.7 by 914mm wide and 1.24mm thick.
If interested $80.00for the two rolls, if you want to phone No is 93041472.
Greg.
GDG
- Pete Sara
- . . . . . . . . . . . . . . . .
- Posts: 2221
- Joined: 09 Nov 2008, 19:44
- Location: Byford WA
- Location: eastern suburbs of perth w.a
It all depends on what you want. you can get the thin wire that a whipper snipper can tear to shreds or the good stuff thats hard for a wedgie to get into ...It all depends on what you want to do with it, I got mine form a place in maddingtion 1.2 m wide 20 long and the wire was 1.24 mm thick and that was 119 a roll... personally if you dont want to much, ( a whole roll ) take greg up on his offer..... pete
i bought gregs anyway, cheers greg
but im buildin a 30'x7x7 avairy so will b needin alot more , i recon cheap stuff on the back and sides/floor like that cheaper chicken wire stuff wud do
then the decent welded square mesh on the front will do me
mike
but im buildin a 30'x7x7 avairy so will b needin alot more , i recon cheap stuff on the back and sides/floor like that cheaper chicken wire stuff wud do
then the decent welded square mesh on the front will do me
mike
- Danny
- ...............................
- Posts: 794
- Joined: 02 May 2011, 08:04
- Location: Sunshine Coast, QLD
- Contact:
I've bought quite a few rolls through them and whilsts its suitable for chicken and pheasant pens the netting spacings are not up to scratch for finch aviaries.spanna wrote:Haven't used it before, or checked for quality, but here's an option:
http://www.tradewarehouse.com.au/wire-m ... -mesh.html
12.7 is what i have out on my other avairy
thought it was 10mm till i put the tape measure on it
thought it was 10mm till i put the tape measure on it