Good Day,
Has any body seen these type of dividers and can assist with dimensions please.
Regards
Riyaad
Vertical Dividers
- Craig52
- ...............................
- Posts: 4991
- Joined: 11 Nov 2011, 19:26
- Location: victoria
I don't know about the size, but it should be to fit one bird only to stop squabbling. Agree with Tiaris, single row only as the way they are in that pic they are poo catchers. There is a guy from Adelaide making them, don't know his name. Craig
- MuzzaD
- ...............................
- Posts: 99
- Joined: 25 Jan 2016, 13:50
- Location: Perth WA
I bought a length of dowelling and a smallish sheet of ply.
Cut the ply to be slightly larger in height than my zebs. Approx 5 cms wide and 15 cms long. Drilled a hole slightly above centre so the partitions did not swivel down. Then pushed them on the cut (60cms) dowel at appropriate spacing. Easy and quick. Hung them in aviary. Does help stop feather plucking. Also have a vertical 25mms square pine about 30cms long. Have drilled through a various heights and sides and put 4 pieces of dowel through. This works pretty well and angles means no "droppings" on each other. Will try to put a picture or 2 up later. Picked this idea up from an Eastern States Guru.
Cut the ply to be slightly larger in height than my zebs. Approx 5 cms wide and 15 cms long. Drilled a hole slightly above centre so the partitions did not swivel down. Then pushed them on the cut (60cms) dowel at appropriate spacing. Easy and quick. Hung them in aviary. Does help stop feather plucking. Also have a vertical 25mms square pine about 30cms long. Have drilled through a various heights and sides and put 4 pieces of dowel through. This works pretty well and angles means no "droppings" on each other. Will try to put a picture or 2 up later. Picked this idea up from an Eastern States Guru.