Gouldian Beak

Ask your questions about breeding finches here.
User avatar
Tintola
...............................
...............................
Posts: 1700
Joined: 08 Mar 2011, 21:12
Location: Murwillumbah1l

It really does look like a deformity. One way to get the bird to "self file" the beak if it gets overgrown is to give it seed on a concrete stepping stone and as it eats it will keep the beak worn down. Sounds strange but it has worked for me with some pigeons and doves with overgrown beaks. Always supplying grit and cuttlebone will also help. Clipping and filing may be needed but can be stressful for such a small bird and bleeding can be a problem if it is cut too closely.
OH LORD, SAVE ME FROM YOUR FOLLOWERS!Image
User avatar
jusdeb
^^^^^^^^^^^^^^
^^^^^^^^^^^^^^
Posts: 9796
Joined: 12 Mar 2009, 19:43
Location: Dubbo, NSW
Location: Western Plains NSW

Coincidence maybe bit I recently bought cement bricks to raise the water bowls up off the ground a bit , the Emblemas now often will wipe their beaks on the bricks for some reason.

Is this self filing ? Might help your bird a bit .


75c each from Bunnings , worth a shot hey .,
Accept that some days you are the pigeon, and some days you are the statue.
David Brent
User avatar
Buzzard-1
...............................
...............................
Posts: 4721
Joined: 27 May 2010, 21:24
Location: Narrabri North West NSW
Location: North West NSW

Tintola wrote:give it seed on a concrete stepping stone
Good point Tintola, and Deb you are more than likely right, if they are doing it more than once. I guess in the wild they have access to various abrasive surfaces.
User avatar
Tintola
...............................
...............................
Posts: 1700
Joined: 08 Mar 2011, 21:12
Location: Murwillumbah1l

Also in the wild many finches are picking up dry seed from gravelly or sandy ground, thus keeping the ever growing beak filed down.
OH LORD, SAVE ME FROM YOUR FOLLOWERS!Image
nathan morley

My finches rub there beak on stuff all the time. An how meny painted finches do you have deb?
Freddy Finchman
...............................
...............................
Posts: 196
Joined: 24 Jun 2010, 20:05
Location: Coolbellup, WA
Location: Perth, WA.

Hi All,
The bird has been fledged for about 2 weeks, Parents are still feeding it most of the time, It,s slowly starting to feed itself !!
It seems healthy enough, But its a loner, Seem,s to stick to itself a lot.
Don,t know, i will monitor it and see how it goes !!
I won,t be using the " Angle Grinder " just yet !!

Cheers Freddy :crazy:
User avatar
Myzomela
...............................
...............................
Posts: 1545
Joined: 24 Jan 2011, 18:44
Location: Melbourne Vic

No angle grinder, but a nail file or dremel tool with a fine sanding head will do the trick and make bleeding less likely than just cutting it with nailclippers/scissors.
Research; evaluate;observe;act
Freddy Finchman
...............................
...............................
Posts: 196
Joined: 24 Jun 2010, 20:05
Location: Coolbellup, WA
Location: Perth, WA.

Hi All ,
Thanks for the advice from everyone, I've managed to clip the bottom beak back almost level with the top one,
I used a nail clipper and had no problem's, no bleeding at all, i might use a Dremel to touch it up later on
Thanks again for the advise !!

Cheers Freddy :thumbup:
User avatar
Melm
...............................
...............................
Posts: 2
Joined: 21 Oct 2021, 14:05
Location: Canada

I dont have the answer, but I do have the same problem, 4 out of 5 gouldian chicks have fledged and are normal, I checked on the last one, small and with a closer look, the upper part if beak seems to be stunted and lower part is normal. Parents are still feeding it but not sure if it is getting enough. I dont know if I should intervene and give extra food or let nature take its course, any suggestions?
User avatar
finchbreeder
^^^^^^^^^^^^^^
^^^^^^^^^^^^^^
Posts: 11489
Joined: 27 Jun 2009, 20:00
Location: Midwest of West. Aust. Coast
Location: Midwest of West.Aust.Coast

Check that there is no "muck" caught in the beak, this can also cause deformity if not removed. Using a blunt matchstick is the best for removal if needed. Otherwise, let nature take it's course.
LML
Post Reply

Return to “Breeding Finches”