What do you think of this idea?

Ask your questions about breeding finches here.
Post Reply
User avatar
cranberry
...............................
...............................
Posts: 496
Joined: 02 Jul 2009, 19:26
Location: Adelaide
Location: Adelaide

I've been thinking about different types of nests that I can use for my Gouldians that mimic hollow logs found in nature. I've been toying with the idea of cutting a length of PVC stormwater pipe and lining the inside with some of that fibre matting found in hanging pots. Then hanging it up really high for added privacy. Do you reckon they might like that?

Does anyone know in the wild if they like horizontal or vertical logs?
User avatar
Poohbear UK
...............................
...............................
Posts: 133
Joined: 09 Nov 2008, 18:37
Location: Nottingham UK
Location: Nottingham UK

I wired up hanging baskets packed with straw last year...shoved a few holes in with a broom handle...the birds loved 'em.
kkhg-5.jpg
0099-2.jpg
You do not have the required permissions to view the files attached to this post.
Image
User avatar
kevins
...............................
...............................
Posts: 132
Joined: 22 Jul 2009, 12:31
Location: Toronto NSW (Lake Macquarie)NSW
Location: Toronto NSW (Lake Macquarie)

what a great idea poohbear...thanks for the pics
User avatar
kevins
...............................
...............................
Posts: 132
Joined: 22 Jul 2009, 12:31
Location: Toronto NSW (Lake Macquarie)NSW
Location: Toronto NSW (Lake Macquarie)

Hi Cranberry
The use of pvc pipe has hit the big time...there were a number for sale at the last local bird sale here....for parrots too......Ive made a couple....biggest problem for me is that are just so dam ugly....in the sense they are not the least bit natural looking...but they are certainly functional and easy to clean. The other disadvantage is the relative cost over other types of nest boxes...especially if you use the end caps made for the pipe.....if you used wood for the ends its much cheaper......I cut the caps in half for one end to give the access...that cuts costs a bit. The easiest way to hang them is to cut a section of pipe about 38mm and then cut that through.....you can screw the back half to the aviary and the slip the pipe in....it acts as a clamp them.
Have fun :)
User avatar
gomer
...............................
...............................
Posts: 4484
Joined: 23 Nov 2008, 17:41
Location: Victoria
Location: Victoria Australia

nice looking straw there poohbear.and a good idea too.
Keeper of Australian Grass Finches
User avatar
fincher
...............................
...............................
Posts: 981
Joined: 17 Nov 2008, 19:09
Location: Perth, Western Australia
Location: perth western austalia

well my dad has made pvc pipe nets for his finches and they use them and both positions and oly put a bit of nesting material in the bottom. hes had masked finches, parrot finches, orange breasts and a few more to nest in them. then hes also made a few nests for the wild birds and has attached a natural wooden spout on. hes had 28s and galahs nesting in them and 1 nest has been occupied for the lasty 6 years. were planning on putting more up this year of natural and PVC pipe nests.
User avatar
kevins
...............................
...............................
Posts: 132
Joined: 22 Jul 2009, 12:31
Location: Toronto NSW (Lake Macquarie)NSW
Location: Toronto NSW (Lake Macquarie)

Hi Cranberry......you might get some ideas from this web site if you havnt already found it
cheers
http://www.jandngaleapvcnestboxes.com/
User avatar
cranberry
...............................
...............................
Posts: 496
Joined: 02 Jul 2009, 19:26
Location: Adelaide
Location: Adelaide

Thanks for the link.
Post Reply

Return to “Breeding Finches”